Ridetech 13027199 User Manual download pdf

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

Part # 13027199

70-74 Chrysler “E” Body Rear AirBar

Components:

1 90000611 Driver side upper bar mount

1 90000612 Passenger side upper bar mount

1 90000608 Driver side upper Shockwave mount

1 90000609 Passenger side upper Shockwave mount

2 90000599 Front lower bar mount

2 90000615 Axle mounts

1 90000644 Inner support plate

1 90000610 Brake line spacer

2 90001001 Upper bars – TW 7.375” (9 ½” C-C length)

2 90001023 Lower bars – WW 21.25”

2 99250001 ¼”-28 straight grease fitting

2 90001589 Threaded Kevlar lined Heim end

2 99752004 ¾”-16 jam nut – for rod end

4 90000552 Aluminum spacer for Heim end

4 90001942 Rubber bushings - pressed into bars and rod ends

4 90001085 Poly bushing for lower bar

2 90000198 Lower bar bushing sleeve

2 90000144 Inner axle tab (Larger)

2 90000155 Outer axle tab

2 90001624 Lower billet Shockwave mount

2 90001617 5/8” shock studs w/ hardware

4 90002067 Aluminum spacer for stud

8 99566002 9/16” SAE hex nut ( For U-bolts )

8 99566003 9/16” SAE flat washer ( For U-bolts )

4 99566004 U-bolts - Axle mount

2 70010694 Jig brackets for upper bar installation

Hardware: (Part # 99010022)

2 1/2”-13 x 1 ¼” Gr. 5 bolt Billet mount to axle bracket

2 1/2"-13 x 1 ¾” Gr. 5 bolt Billet mount to axle bracket

4 1/2”-13 Gr. 5 Nylok nut Billet mount to axle bracket

1 5/16”-18 x 1 ¾” Gr. 5 bolt Brake line & spacer

1 5/16” SAE flat washer Brake line & spacer

1 5/16” lock washer Brake line & spacer

2 1/2”-13 x 2 ¾” Gr.5 bolt Upper Shockwave mount to body

2 1/2”-13 Nylok nut Upper Shockwave mount to body

4 1/2” SAE flat washer Upper Shockwave mount to body

4 5/8”-11 x 4” Gr. 5 bolt Shockwave to upper mount & front bar to body

2 5/8”-11 Gr. 5 Nylok nut Shockwave to upper mount

6 5/8” SAE flat washer Shockwave to upper mount

6 5/8”-11 x 2 ¾” Gr. 5 bolt Upper & lower bars

8 5/8”-11 Nylok jam nut Upper & lower bars

26 3/8”-16 x 1” thread forming bolt Shockwave and upper bar mounts to frame

8 3/8”-16 x 1 ¼” Gr. 5 bolt Lower front bar mount

6 3/8”-16 x 1” Gr. 5 bolt Inner support plate

4 3/8”-16 x 2 ¼” Gr. 5 bolt Inner support plate

18 3/8”-16 Nylok nut Inner support plate

48 3/8” SAE flat washers Shockwave and upper and lower bar mounts

2 3/8”-16 x ¾” Gr. 5 bolt Upper bar installation jig

2 3/8”-16 nut Upper bar installation jig

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Part # 13027199

350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 13027199 70-74 Chrysler “E” Body Rear AirBar Co

Page 2

1. Raise the vehicle to a safe and comfortable working height. Use jack stands to support the vehicle with the suspension hanging freely. 2.

Page 3

7. Using the supplied U-bolts, fasten the lower axle bracket to the factory leaf spring pad. 8. Bolt the lower Billet Shockwave mount to th

Page 4

13. How do you set the pinion angle? On a single-piece shaft you want to set it up where a line drawn through the center of the

Page 5

15. Attach the upper Shockwave mount to the factory upper shock mount using a ½” x 2 ¾” bolt, Nyloc nut, and flat washers. Swing the bracket

Page 6

18. Insert a 5/8” x 4” bolt through the upper mount and Shockwave eye. There should be a 5/8” flat washer on each side of the poly

Page 7 - Upper Bar Installation Jig

Upper Bar Installation Jig • This jig has been supplied to aid in the installation of the upper 4 link bar. It can be temporarily used to properl

Page 8

350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Should I weld my AirBar 4 link assembly in? Since we

Comments to this Manuals

No comments

Ridetech 13027199 User Manual

Browse online or download User Manual for For the car Ridetech 13027199. Ridetech 13027199 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Ridetech 13027199