Ridetech 11330607 User Manual download pdf

Part # 11330607

63-72 C-10 Select Series Front Shock Kit

For Use w/ Lower StrongArms

Shock Assembly:

2 26439999 3.5” stroke Select Series shock

2 90001632 Compression bump stop

Components:

2 90001831 Stud top base

2 90001905 Step washer for Select shocks

2 35900006 Harness - Shocks to Select ECU

2 35900008 Harness – Stud adapter

4 90001830 Aluminum cap for Delrin ball

2 90001903 Upper Delrin ball half

2 90001904 Lower Delrin ball half

2 90001619 Cantilever pin w/ hardware

4 90002042 Aluminum bearing spacer - .625” I.D.

1 90002301 Driver side upper shock bracket – bolt-on

1 90002302 Passenger side upper shock bracket – bolt-on

Hardware:

8 99371004 3/8” x 1 ¼” USS bolt Upper shock bracket to frame

8 99372002 3/8” USS Nylok nut Upper shock bracket to frame

16 99373003 3/8” SAE flat washer Upper shock bracket to frame

2 99623001 5/8” SAE flat washer Cantilever pin

2 99122001 12mm Nylok nut Upper shock stud

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

1 2 3

Part # 11330607 63-72 C-10 Select Series Front Shock Kit For Use w/ Lower StrongArms Shock Assembly: 2 26439999 3.5” stroke Select Series shock 2

Installation Instructions 1. Place the new upper shock mount against the frame, the tab in the front of the bracket will slide into the fact

Upper Shock Stud Assembly 1. 90001831- Short Delrin stud top base – 2” 2. 90001905- Step washer (Step faces down) 3. 90001902- Aluminum cap for

No comments

Ridetech 11330607 User Manual